CUSTOM TEETH MOLD KIT INSTRUCTIONS
Please read instructions carefully before making the mold. Make sure to move quickly during the entire process as the putty dries extremely quick.
Step 1: Identify Trays and Putty (Impression Materials).
Identify the enclosed upper and lower trays and putty (impression material). Use one putty pack per tray.
Step 2: Mixing the Putty and Loading the Tray
Remove the putty & rapidly mix the 2 colors together with your fingers. (about 10 seconds)
Then roll the mixture between your hands into a uniform strand. (see fig. 1 & 2 below)
Evenly push the material into all portions of the tray as shown in figure 3.
Step 3: Taking the mold From start to finish, this step takes about 2 minutes, & should be done in front of a mirror
Center the tray with the front teeth close to the rim of plastic, but not hitting the plastic & firmly press the upper tray into your teeth until you feel the tips of your teeth going through the putty material and lightly touching the bottom inside of the plastic tray. (Do not bite into it, simply press the upper tray into your teeth) (see fig. 4 below)
Once seated, do not move the tray until the putty sets. Keep your lips relaxed and loose. When seating the lower tray, follow the same steps, but also keep your tongue towards the roof of your mouth. Then once the tray has been firmly seated, relax your tongue.
Once removed, examine the mold. The impression should show accurate details of your teeth. (see figures 6 & 7 below)
Step 4: Put the putty and the retainer in a small box then into the small to medium USPS priority mail box. Make sure the mold is double-boxed as stated,
GangstaGold will notify a customer within 5 business days upon receipt of a mold and payment should the impression be determined by the jeweler to not be unacceptable. If the jeweler deems a mold impression to not be acceptable, the customer will be required to send another putty impression.
fig 1 
